New nanocomposites containing metal nanoparticles, carbon nanotube and polymer

Metal-carbon nanotube-graft-polymer (MCNT-g-P) nanocomposites were synthesized and characterized successfully. In this work, multiwall carbon nanotubes (MWCNT) were opened using HNO₃/H₂SO₄ mixture and filled by metal nanoparticles such as silver nanoparticles through wet chemistry method. Then MWCNT containing metal nanoparticles were used as macroinitiator for ring opening polymerization of ε-caprolactone and MCNT-g-P nanocomposites were obtained. Length of grafted polymer arms onto the MWCNT was controlled using MWCNT/ε-caprolactone ratio. Structure and properties of nanocomposites were evaluated by TEM, DSC, TGA, and spectroscopy methods.     

Enhancing photoinduced hydrophilicity of micro arc oxidized TiO2 nanostructured porous layers by V-doping

This study sheds light on the effect of vanadium doping on hydrophilicity properties of micro arc oxidized TiO₂ porous layers. Pure and V-doped titania layers, with a pore size of 50–400 nm, were grown by micro arc oxidation method. Morphology and topography of the layers were studied by SEM and AFM techniques where formation of a porous structure with a rough surface was confirmed. Moreover, phase structure and chemical composition of the samples were investigated employing XRD and XPS techniques. The pure TiO₂ layers consisted of anatase and rutile phase. Vanadia phase was also detected in V-doped layers. It was also revealed that V₂O₅ not only dispersed in the TiO₂ matrix, but also doped into the crystalline lattice. Optical properties and band gap energy of the synthesized layers were evaluated by a UV-Vis spectrophotometer. Our results showed that the band gap energy decreased when vanadium was introduced into the titania lattice. Finally, hydrophilicity of the pure and the doped layers was studied under ultraviolet and visible illuminations by measuring the water contact angle on their surface. The V-doped layers, especially those which were grown under intermediate voltages, revealed an enhanced hydrophilicity when compared to the pure TiO₂ layers.     

Catalytic determination of traces of silver(I) using the oxidation of Janus Green with peroxodisulfate.

A method for sensitive and selective determination of silver based on the catalytic effect of silver(I) ion on the oxidation of Janus Green by peroxodisulfate is described. o-Phenanthroline is used as an activator. The rate of the decrease in absorbance of Janus Green (at 615 nm) is proportional to the concentration of silver in the range of 0.3-4.0 ng mL(-1) and 4.0-500.0 ng mL(-1). The theoretical limit of detection was 0.25 ng mL(-1). The method is free from most interferences. The method was applied to the determination of silver in plants (the uptake of silver by plants), in photographic solutions, lake water and several synthetic samples.     

Manganese(II) complexes of hydrazone based NNO-donor ligands and their catalytic activity in the oxidation of olefins

The reaction between tridentate NNO donor hydrazone ligands, (E)-2-cyano-N′-(phenyl(pyridin-2-yl)methylene)acetohydrazide (HL¹) and (E)-2-cyano-N′-(1-(pyridin-2-yl)ethylidene)acetohydrazide (HL²), with MnCl₂·4H₂O in methanol resulted in [Mn(HL¹)Cl₂(CH₃OH)] (1) and [Mn(HL²)Cl₂(CH₃OH)] (2). Molecular structures of the complexes were determined by single-crystal X-ray diffraction. All of the investigated compounds were further characterized by elemental analysis, FT-IR, TGA, and UV–Vis spectroscopy. These complexes were used as catalysts for olefin oxidation in the presence of tert-butylhydroperoxide (TBHP) as an oxidant. Under similar experimental conditions with equal manganese loading, the presence of [Mn(HL²)Cl₂(CH₃OH)] (2) resulted in higher conversion than [Mn(HL¹)Cl₂(CH₃OH)] (1).     

A simple synthesis of ferrocenyl bis-amides by a Ugi four-component reaction

An efficient and simple synthesis of ferrocenyl bis-amides by the Ugi four-component reaction of ferrocenecarboxaldehyde, carboxylic acids, isocyanides and amines in methanol at room temperature is reported.     

电氧化异丙肾上腺素的纳米复合电催化剂：用作传感器

在金纳米粒子(AuNPs)上经苯硫酚衍生物(3,4二羟基苯基-偶氮-苯硫酚, DAT)自组装制得了一种新型纳米复合物,用于修饰玻璃碳电极(GCE/AuNP-DAT).采用循环伏安法研究了该新型电极的性质,并将其用作异丙肾上腺素(IP)电催化剂,考察了该纳米复合物的电催化活性,从而得到反应机理和催化反应速率常数.由于GCE/AuNP-DAT电极对尿酸氧化没有电催化活性,因此可将IP的氧化信号从该改进电极中分离出来,从而排除了尿酸对IP测定的干扰.该电极可作为传感器,当用于差动脉冲伏安法测定IP时,线性动态范围为1.0–1500.0μmol/L,检测极限为0.46μmol/L.     

Nano-colloidal functionalization of textiles based on polysiloxane as a novel photo-catalyst assistant: processing design

Due to the opposite surface charge of TiO(2) and silver nano-particles, at around neutral pH, it is expected that the interaction between these particles and cross-linkable polysiloxane (XPs) resin and thus their final properties would be affected by their processing technique. This paper has focused on the effect of processing design on the interaction, surface orientation and final properties of surface nano-colloidal functionalization. The results disclosed the key role of the applied process on the properties of the treated fabrics which have been well discussed through the modeling of this effect on orientations of nanoparticles on the surface. The developed models are interestingly verified by various characterizations. Applying a premixed TiO(2)/XPs colloid as an after treatment on Ag treated samples caused more enhanced stain photo-degradability and UV protection properties, while the reduction of enhanced hydrophobicity, washing durability, and stain-repellency were observed as compared to applying Ag/XPs premixed colloid on TiO(2). The role of processing on XPs stabilizing efficiency and its co-photo-catalytic function on TiO(2) nanoparticles has been concluded and deeply discussed. The appropriate processing design can be tailored in order to accomplish desirable hydrophilicity/hydrophobicity with a granted bioactivity. The results reveal that ideal bioactivity, stain photo-degradability, self-cleaning, UV protection, anti-staining properties, and washing durability can be achieved by applying a mixture of silver and XPs as an after-treatment on TiO(2) treated fabrics.     

Isocyanide‐Based Three‐Component Synthesis of Pyrano‐pyrido‐quinoxalines

Pyrano‐pyrido‐quinoxaline derivatives were synthesized in good yields by a three‐component reaction of isocyanides, dialkyl acetylenedicarboxylates, and pyrido[1,2‐a]quinoxaline‐triones in DMF at 100°.